englishčesky

Machines

Accessories

Equipment

Offer machining


Stroje/Frézka/ #13390

Item: Vertical machining center
Catalogue No.: 13390
WWW: https://strojesvoboda.com/e13390
Model, parameters: VMC 1260 E CNC
Producer: ZPS, a.s., Zlín
Production Year:
  • 2000
Description:
  • working stroke:
     - Axis x (work table) 1270 mm
     - Y axis (cross support) 610 mm
     - Z axis (headstock) 760 mm
    distance:
     - spindle face from table 150-190 mm
     - Spindle axis from the 635 mm rack
     - 910 mm floor worktop
    feeds:
     - Working feeds in X, Y, Z axes 0-8 m / min
     - Programmable up to 20 m / min
     - Rapid traverse on the X, Y, Z 20 mm axis
    accuracy:
     - Measuring system in the X, Y, Z axis indirect
     - Measurement and evaluation according to VDI / DGQ 3441
     - precision of X, Y, Z 0.010 mm axis positioning
     - Repeated X, Y, Z 0.008 mm precision
     - measurement and evaluation according to JIS B 6336 standard
     - X, Y, Z + -0.003 mm positioning accuracy
     - Repeated accuracy on the X, Y, Z + - 0.002 mm axis
    desk:
     - work area 1450x590 mm
     - Number of T grooves x width 5x18 mm
     - Medium groove dimension 18 H6 mm
     - centering hole diameter dia. 30 H6 mm
     - groove pitch 125 mm
     - Max load 1350 kg
     - Max workpiece dimensions at max tool length 300 mm 1016x590x300 mm
    spindle:
     - Speed ​​range:
        - Lower range 0-1250 rpm.
        - Higher range 1251-5000 rpm.
     - torque transmission with a two-stage planetary gearbox
     - Spindle diameter in the front bearing 90 mm
     - ISO 50 clamping tape
     - electrical positioning
    tool tray:
     - tool holder 50-A / DIN 69 871-1
     - clamping pin 50-A / DIN 69 872
     - Number of tools in the magazine / machine 16/32
     - exchange time - tool tool 8 s
     - Searching the tool bidirectionally
     - max tool diameter:
       - when the tray is fully loaded, 130 mm
       - 220 mm omitted
     - max tool length 300 mm
     - max. tool weight 8 kg
     - Max. weight of all tools in one 108 kg container
    Drives:
     - spindle:
       - Continuous output 18.5 kW
       - Overload power (S6 - 30 min) 22 kW
       - rated speed 1500 rpm.
       - Maximum torque 208 Nm
       - Maximum torque at overload 286 Nm
     - feeds:
       - Nominal torque in the X, Y axis 18.6 Nm
       - Z-axis nominal torque 28.4 Nm
       - nominal speed in the X, Y, Z axis 1500 rpm.
       - axial force in the X axis, Y 10500 N
       axial force in the Z axis 17500 N
    lubricating aggregate:
     - tank capacity 1.5 l
     - pump:
       - engine power 0,003 kW
       - Rated speed of 3200 rpm.
       - quantity delivered 0,005 l / 30 min.
    coolant unit:
     - volume (depending on the options used):
       - 420 l tanks
       - 150l chips
       - 55 l chip conveyor
       - 140 l filter units
     - Tool cooling pump:
       - engine power of 1.14 kW
       - rated speed 3450 rpm.
       - Delivery rate 50 l / min.
     - pump for rinsing telescopic covers
       - engine power 1.6 kW
       - rated speed 3450 rpm.
       - Delivery rate 100 l / min.
    air device:
     - Inlet air pressure 0.55-0.65 MPa
     - Air consumption approx. 6 m3 / hour.
     - the volume of oil in the 0.1 l air-lubrication tank
     - volume of 0.3 l multiplier buffer tank
    requirements for electricity.
     - rated mains voltage 3x230 V / 60 Hz
     - Operating power 27 kVA
     - power installed 35 kW
     - 100 A full load current
    the ACRAMATIC A 2100 control system
    additional information:
     - Floor area of ​​the machine 3200x2120 mm
     - Ground plan area with open door 4730x2920 mm
     - max. required floor area of ​​the machine 44700x2920 mm
     - hole width in the lids with 1110 mm open door
     - Maximum working height of the machine 3450 mm
     - machine weight (without coolant tank and chip conveyor) 8000 kg
     - Weight of the coolant tank with pumps (without liquid) 210 kg
     - Chip conveyor weight 260 kg
     - the mass of 90 kg chips
     - weight of the 80 kg filter unit
Status: READY to be shown RUNNING
   All offered items are our property, physically ON OUR STOCKS.

Type photos:

Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (1).jpg)

Machine photos:

Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (2).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (3).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (4).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (5).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (7).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (8).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (9).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (10).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (11).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (12).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (23).jpg)
Vertikální obráběcí centrum VMC 1260 E CNC (Vertical Machining Center VMC 1260 E (15).jpg)

Questionaire:

Company / Bussiness name*: *private customers - just title and full name.
E-mail: subscribe occasional newsletter
Phone:
Contact person:
Request:
 

How to ask??
  • Please fill in Your contact data into the questionaire.
    • If You are not representing any company, just enter Your name as (required) bussiness name.
    • You may change the pre-defined inquiry text as required.
    • If You are interested in other machines on our web, please try to submit us Your requests separately
  • GDPR: Clicking on Submit button confirms your agreement with appending of Your inquiry form into our internal bussiness database. The above provided data are used and archived strictly for requested bussiness communication regarding Your inquiry, no information is provided or shared to third parties. We do not use custommer accounts, but You may ask to stop processing Your contact data ANYTIME, personally or using Your contact e-mail.
  • You shall be contacted by our bussiness departament as soon as possible, with a complete offer for the requested items, list prices DO NOT include VAT and the offer is subject of immediate sale.
  • Our stocks consist of thousands individually priced items. Therefore, We do not provide any price lists.